KROHNE Group / English

MAC 100

Liquid analytical transmitter for measurements with sensors of the OPTISENS portfolio

Output: 3 x 4…20 mA, 3 relays (mechanical)
Input: max. 2 x sensor, 2 x temperature
-15…+55°C / +5…+131°F (ambient)
Robust housing for wall-mount installation

Overview

The MAC 100 is a transmitter for liquid analytical measurements with sensors of the OPTISENS pH, ORP, COND, IND, ODO, ADO, TUR and CL sensor series. The transmitter can be installed with up to two sensors plus temperature input. Due to its robust aluminium housing, it is perfectly suited for wall-mount installation even in the harshest ambient conditions. Its optional stainless steel version is the perfect fit for all applications with hygienic requirements.

The MAC 100 features three analogue (4…20 mA) and relay outputs. It adheres to the same General Device Concept (GDC) as the KROHNE flow and level converters for rapid commissioning, reduced training times and standardisation.

Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.

Can be used in combination with pH, ORP, free chlorine, chlorine dioxide, ozone, dissolved oxygen, turbidity and conductivity sensors
With temperature input and integrated temperature and pH compensation
Robust aluminium housing (IP66/67, NEMA 4/4X)
Also available as hygienic stainless steel version (IP69)
Calibration and status logbook
Common operating and service concept with KROHNE flow and level devices (GDC)

Related products

Potentiometric pH sensor for chemicals, industrial wastewater and low conductivity media (>2 μS/cm)

For use with analytical transmitter
Process connection: PG13.5
0…14 pH; Max. +130°C / +266°F; 10 bar / 145 psi
Glass sensor with 2 open diaphragms and Pt100 for temperature compensation

View product details

Potentiometric pH sensor for wastewater, surface and process water applications

For use with analytical transmitter
Process connection: PG13.5
0…14 pH; Max. +70°C / +158°F; 10 bar / 145 psi
Glass sensor with PTFE diaphragm and optional Pt100 for temperature compensation

View product details

Potentiometric pH sensor for municipal and industrial wastewater applications

For use with analytical transmitter
Process connection: ¾ NPT (male)
0…14 pH; Max. +80°C / +176°F; 6.9 bar / 100 psi
With CPVC sensor body, PTFE diaphragm and Pt100 for temperature compensation

View product details

Potentiometric pH sensor for potable water applications

For use with analytical transmitter
Process connection: PG13.5
0…14 pH; Max. +70°C / +158°F; 2 bar / 30 psi
Glass sensor with ceramic diaphragm and optional Pt100 for temperature compensation

View product details

Potentiometric pH sensor for water and wastewater applications

For use with analytical transmitter
Process connection: ¾ NPT (male)
0…14 pH; Max. +80°C / +176°F; 6.9 bar / 100 psi
With CPVC sensor body, ceramic diaphragm and Pt100 for temperature compensation

View product details

Potentiometric pH sensor for lower conductivity water applications (>20 μS/cm)

For use with analytical transmitter
Process connection: PG13.5
0…14 pH; Max. +100°C / +212°F; 1 bar / 14 psi
Liquid electrolyte glass sensor with open glass sleeve diaphragm

View product details

Potentiometric pH sensor for lower conductivity water applications (>50 μS/cm)

For use with analytical transmitter
Process connection: PG13.5
0…14 pH; Max. +100°C / +212°F ; 1 bar / 14 psi
Liquid electrolyte glass sensor with 3 ceramic diaphragms

View product details

Potentiometric ORP sensor for water and wastewater applications

For use with analytical transmitter
Process connection: PG13.5
-1500…+1500 mV; Max. +70°C / +158°F; 2 bar / 30 psi
Glass sensor with platinum electrode and ceramic diaphragm

View product details

Potentiometric ORP sensor for water and wastewater applications

For use with analytical transmitter
Process connection: ¾ NPT (male)
-2000…+2000 mV; Max. +80°C / +176°F; 6.9 bar / 100 psi
Sensor with CPVC body, platinum electrode, ceramic diaphragm and Pt100 temperature sensor

View product details

Conductive conductivity sensor for water, wastewater, process water or pure water

For use with analytical transmitter
Process connection: G½, G¾, G1, ¾ NPT (male)
0.05 μS/cm…20 mS/cm; Max. +135°C / +275°F
With two stainless steel, titanium or graphite electrodes and Pt100 for temperature compensation

View product details

Conductive conductivity sensor for hygienic applications

For use with analytical transmitter
Process connection: Clamp DN25-40, 1½"
0.05…1000 μS/cm; Max. +135°C / +275°F
Short or long version with stainless steel electrodes and Pt100 for temperature compensation

View product details

Inductive conductivity sensor for water, wastewater and chemical applications

For use with analytical transmitter
Process connection: G1½ union nut and immersion versions
1…2000 mS/cm; Max. +100°C / +212°F
Electrodeless conductivity sensor with Pt1000 for temperature compensation

View product details

Inductive conductivity sensor for food and beverage applications

For use with analytical transmitter
Process connection: G1½ (male, non-hygienic)
0.5…2000 mS/cm; Max. +125°C / +257°F (for SIP/CIP); 10 bar / 145 psi
Sterilisable PEEK sensor (FDA and EC1935/2004 conform) with temperature compensation

View product details

Optical total suspended solids sensor for wastewater applications

For use with MAC 100 analytical transmitter
For immersion
0…4 AU, 0…18.5 g/l (sludge); max. +70°C / +158°F; 1 bar / 14 psi
Robust stainless steel sensor using single beam (180° NIR LED) principle, with optical sapphire glass windows

View product details

Amperometric oxygen sensor for water and wastewater applications

For use with analytical transmitter
For immersion or insertion
0…20 mg/l; Max. +50°C / +122°F; 6 bar / 87 psi
With stainless steel sensor body, rugged PTFE membrane, exchangeable electrode cartridge and temperature compensation

View product details

Optical oxygen sensor for water and wastewater applications

2-wire loop powered, 4…20 mA or Modbus for direct connection to a PCS; calibration and configuration via Modbus or with MAC 100 transmitter
For immersion or insertion
0…20 mg/l; Max +50°C / +122°F; 6 bar / 87 psi
With rugged PVC sensor body, available with spray cleaning nozzle (immersion version)

View product details

Potentiostatic amperometric disinfectant sensor for water and wastewater applications

For use with MAC 100 analytical transmitter
Process connection: PG13.5
Cl₂: 0.03…20 mg/l; ClO₂: 0.05…5 mg/l; O₃: 0.05…5 mg/l; Max. +70°C / +158°F; 6 bar / 87 psi
Membrane-free sensor with 2 gold electrodes and sensor cleaning feature

View product details

Potentiostatic amperometric disinfectant measuring system for water and wastewater applications

Completely mounted with MAC 100 analytical transmitter (Output: 3 x 4…20 mA)
Pre-installed and tested; for bypass lines
Cl₂: 0.03…20 mg/l; ClO₂: 0.05…5 mg/l; O₃: 0.05…5 mg/l; Max. +50°C / +122°F; 6 bar / 87 psi
With chlorine sensor, valves, flow cells, optional pH sensor

View product details

KROHNE is a leading system provider in the field of industrial process measurement instrumentation. Employing over 4,000 people worldwide, KROHNE provides complete solutions for flow, level, pressure and temperature measurement, as well as for process analysis. In addition to these measurement devices, KROHNE offers commissioning, calibration and maintenance services.
The name KROHNE stands for innovation, reliability and high-quality products.

dev-ng.krohne.com